Inputs
Two parallel connected female XLR connectors, one on the front panel and the rear panel.
Input Impedance > 2kΩ
CMRR > -100dB @ 100Hz to 10kHz
Equivalent input noise < - 100dBu @ unity gain
Connectors 3 pin female XLR (external), 3 way terminal strip (internal)
Signal present level > - 25dBu
Signal clip level > + 21dBu

Outputs
Electronically balanced - one output with one front and one rear panel male XLR connectors, one output with one rear panel male XLR connector only
Source impedance 50 Ω
Min Load 600 Ω
Max Level > + 21dBu @ 1kHz
Connectors 3 pin male XLR (external), 3 way terminal strip (internal)

Transformer balanced & isolated - one male XLR connector on the front panel for each output

Source impedance 70 Ω
Min Load 600 Ω (-3dB level loss into 200Ω )
Max Level + 18dBu @ 1kHz
Connectors 3 pin male XLR (external), 3 way terminal strip (internal)

Performance
Electronically balanced outputs
Frequency response + 0 / -0.5dB 20Hz to 20kHz
Distortion (THD+N) < 0.01 % @ 1kHz +4dB
Transformer balanced & isolated outputs
Frequency response + 0 / -1.0dB 20Hz to 20kHz
Distortion < 0.04 % @ 1kHz +4dB

Terminations
Audio Inputs / Outputs 3 pin XLR
Power IEC

Power Requirements
Voltage 110 to 240V ± 10% 50/60Hz<60W

Weight
Nett 7.4 kg
Shipping 8.4 kg

Dimensions
Width 483 mm (19 inches)
Depth 300 mm (12 inches)
Height 132 mm (5.2 inches)

Trade Descriptions Act: Due to the company policy of continuing improvement, we secure the right to alter these specifications without prior notice.

Back to DN1248 Plus Mic Splitter